Untitled Document

CURRENT LOCATION：HOME > FAQ

D7723 Series: We have a problem with a camera having "TEST MODE" displayed on the screen OSD), how do we get this off the screen i.e. out of "test mode"?

[2005/5/18] (3895)

D7723 Series: what might cause the camera to PAN continuously until I send the stop command to Dome?

[2005/5/18] (3544)

D7723 Series: Does the DSCP protocol have a command of moving by the number of degrees?

[2005/5/18] (3718)

D731X Series: Why do I have to press the "menu" key for three seconds in order to call up the OSD menu while using DSCP Protocal

[2005/5/18] (3223)

D7723 Series: Will the Speed Domes ALARM Inputs accept +5VDC trigger?

[2005/6/15] (4124)

D7723 Series: Is their any other way of TRIGGERING the Speed dome Alarm's for example via the RS485 BUS

[2005/6/15] (3528)

D7723 Series: Is their any MAXIMUM Distance LIMIT for the length of the Speed dome ALARM Cable Pair in Meter?

[2005/6/15] (3532)

D7723 Series: What is the power consumption in amps for the dome? With a housing w/o heater? Housing w/heater?

[2005/6/15] (3409)

D7723 Series: What is the maximum distance that the 24VAC power supply can be placed from the D7723 dome assuming an 18 gauge 2 wire conductors?

[2005/6/15] (3706)

D7723 Series: What is the operating temperature of the speed dome in housing w/o heater? / with heater?

[2005/6/15] (3143)

First

Last

Records 11 to 20 of 42